.PS
# EEP.m4
cct_init
include(libSLD.m4)

command "{\sf"

Pic1: [
 T: dot
 switch(up_ elen_); {"Public supply" above}
 Bus1: sl_busbar(right_ 5*dimen_,6,port=D) with .c at T
 {"{\scriptsize 20$\,$kV}" at Bus1.Start above ljust}
 S1: switch(from Bus1.P1-(0,elen_) up_ elen_)
 S2: switch(from Bus1.P2-(0,elen_) up_ elen_)
 TRF1: sl_transformer(from Bus1.P3 down_ elen_,type=S,,,Delta,Y)
   arrow down_ dimen_/3
 TRF2: sl_transformer(from Bus1.P4 down_ elen_,type=S,,,Delta,Y)
   arrow down_ dimen_/3
 TRF3: sl_transformer(from Bus1.P5 down_ elen_,type=S,,,Delta,Y)
   arrow down_ dimen_/3
 S3: switch(from Bus1.P6-(0,elen_) up_ elen_)
 Bus2: sl_busbar(right_ 1.5*dimen_,3,port=D) with .c at Bus1.P1+(0,-dimen_*3)
 {"{\scriptsize 20$\,$kV}" at Bus2.Start above ljust}
 {"{\scriptsize 1.25$\,$MVA}" at Bus2.P2 below}
 S4: switch(from Bus2.P2 to S1.start)
 TRF4: sl_transformer(from Bus2.P1 down_ elen_,type=S,,,Delta,Y)
 S4: switch(from Bus2.P3+(0,-elen_) to Bus2.P3)
]

command "\definecolor{cornflowerblue}{rgb}{0.39, 0.58, 0.93}"
command "\definecolor{goldenrod}{rgb}{0.85, 0.65, 0.13}"
command "\definecolor{colorA}{rgb}{0.79, 0.59, 0.57}"
command "\definecolor{colorB}{rgb}{0.2, 0.8, 0.2}"
command "\definecolor{colorC}{rgb}{0.21, 0.47, 0.86}"
command "\definecolor{colorD}{rgb}{0.2, 0.6, 0.8}"
command "\definecolor{colorE}{rgb}{0.2, 0.63, 0.8}"
command "\definecolor{colorF}{rgb}{0.78, 0.36, 0.3}"
Pic2: [
# https://tex.stackexchange.com/questions/597643/draw-a-power-system-network
 B1: sl_busbar(up_ dimen_*4/3,3)
 sl_transformer(right_ 2*dimen_ from last [].P2,
  type=S;body=shaded "lightgray"); variable(,,,dimen_*3/2)
 B2: sl_busbar(up_ dimen_*4/3,3)
  { line left_ dimen_/2 from B2.P1
    C1: capacitor(down_ dimen_/2); ground(,T) }
  line right_ dimen_/2
  { line to (Here,C1.start); C2: capacitor(to (Here,C1.end)); ground(,T) }
  ebox(right_ 3.5*dimen_, 2.5*dimen_, dimen_/5, 0.75)
  { line to (Here,C1.start); C3: capacitor(to (Here,C1.end)); ground(,T) }
  line right_ dimen_/2
 B3: sl_busbar(up_ dimen_*4.5,6)
  line right_ dimen_*3/4 from B3.P1; box wid dimen_*3 ht dimen_*.6 \
    shaded "goldenrod" "Static Load"
  line right_ dimen_*3/4 from B3.P2; box wid dimen_*3 ht dimen_*.6 \
    shaded "colorA" "Electronic Load"
  sl_disk(right_ dimen_ from B3.P3,
   text="A/C";circle=shaded "colorB";diam=dimen_*3/4)
  sl_disk(right_ dimen_ from B3.P4,
   text="M";circle=shaded "colorC";diam=dimen_*3/4)
  sl_disk(right_ dimen_ from B3.P5,
   text="M";circle=shaded "colorD";diam=dimen_*3/4)
  sl_disk(right_ dimen_ from B3.P6,
   text="M";circle=shaded "colorE";diam=dimen_*3/4)
  sl_disk(left_ dimen_ from 1/2 between B3.P1 and B3.P2,
   text="\scriptsize DER\_A"; circle=shaded "colorF";diam=dimen_*3/4)
] with .B1 at Pic1.Bus2.End+(24bp__,0)

Pic3: [
define(`shadedb',shaded "cornflowerblue")
Loopover_(`LR',                     # loop to take advantage of symmetry
 `define(`opposite',`ifelse(LR,left,right,left)')dnl
  ifelse(LR,left,L,R)`'side: [
    sl_generator(LR dimen_/2,type=B;name=G1;circle=shadedb,box=shadedb)
      { move from G1 opposite last circle.rad*3/2 down_ last circle.rad
        ifelse(LR,left,`Delta',`Wye')symbol(,size=sourcerad_*2/3) }
    T1: sl_transformer(opposite dimen_*3/2,name=Tx)
    Bus1: sl_busbar(up_ dimen_*3/2,3,) with .P2 at Here
    Br1: sl_breaker(from Bus1.P3 opposite elen_,box=shadedb)
    line opposite dimen_*4/3
    Br2: sl_breaker(from Bus1.P1 opposite elen_,box=shadedb)
    Br3: sl_breaker(down_ dimen_,box=shadedb)
    Bus2: sl_busbar(opposite dimen_,3) with .P2 at Here
    T2: sl_transformer(down_ dimen_ from Bus2.P2,name=X2)
    sl_disk(down_ dimen_/2,type=B;text="SM";name=SM1;circle=shadedb,box=shadedb)
    { move from last circle opposite sourcerad_*3
      Wyesymbol(,type=G`'ifelse(LR,right,L);size=sourcerad_*2/3) }
    ]',
  left,right)
 "Bus 1" at Lside.Bus1.top above
 "Bus 2" at Rside.Bus1.top above
 "Bus 3" at Lside.Bus2.w above
 "Bus 4" at Rside.Bus2.e above
 "TL$_1$ 50$\,$km 69$\,$kV" at 1/2 between Lside.Br1 and Rside.Br1 above
 "TL$_2$ 30$\,$km" ljust "69$\,$kV" ljust at Lside.Br2.end + (-18bp__,12bp__)
 "TL$_2$ 20$\,$km" ljust "69$\,$kV" ljust at Rside.Br2.end + (-18bp__,12bp__)
 "G$_1$ 50$\,$MVA" ljust "13.8$\,$kV" ljust at Lside.G1.w+(-25bp__,-32bp__)
 "G$_2$ 30$\,$MVA" ljust "13.8$\,$kV" ljust at Rside.G1.w+(10bp__,-28bp__)
 "T$_1$ 50$\,$MVA" "13.8/69$\,$kV $\Delta$/Y" \
    at Lside.Tx.s+(-2bp__,-25bp__) below
 "T$_2$ 30$\,$MVA" "69/13.8$\,$kV Y/$\Delta$" \
    at Rside.Tx.s+(2bp__,-27bp__) below
 "T$_3$ 50$\,$MVA" rjust "13.8/69$\,$kV Y/$\Delta$" rjust \
  at Lside.X2.w+(-4bp__,0)
 "T$_4$ 20$\,$MVA" ljust "69/6.9$\,$kV Y/$\Delta$" ljust \
  at Rside.X2.e+(4bp__,0)
 "SM$_1$ 30$\,$MVA" rjust "13.8$\,$kV" rjust at Lside.SM1.w+(-4bp__,0)
 "SM$_2$ 20$\,$MVA" ljust "6.9$\,$kV" ljust at Rside.SM1.e+( 4bp__,0)
] with .nw at (Pic1.w,last [].sw + (0,-15bp__))

  command "}%"

.PE
